The RodeLink Filmmaker Kit from Rode is a wireless system for film and video production that features a transmitter, receiver, and an included lavalier microphone. The system utilizes a Series II 2.4 GHz 128-bit encrypted digital transmission signal that constantly monitors and hops between frequencies to select the strongest signal. The kit offers a high signal-to-noise ratio and provides a high-resolution 24-bit 44.1 kHz digital transmission of lossless audio at a range of up to 328 ft. Up to 8 systems can be used together simultaneously.

The beltpack transmitter features a simple 3-stage gain adjustment and a mute lock function to prevent accidental muting. A locking 3.5mm input audio connector ensures body worn microphones remain secure. The camera mount receiver features a removable shoe mount enabling it to be used on camera or as a belt pack receiver. A mute override function gives complete control to the operator, while mute status, input level, and battery status for both the transmitter and receiver are displayed on the front of the unit. The receiver also utilizes the same locking 3.5mm connector as the transmitter to provide solid security.

Both the beltpack transmitter and camera mount receiver can be powered by any USB power source using a standard micro-USB cable. The system offers eight discrete channels that can easily be set up in seconds with over 8000 different channel combinations available. Channel selection and pairing is achieved with a one-press operation and automatic scanning, which significantly reduces setup times when compared to traditional UHF setups.

RODELink Filmmaker Kit Specifications

Transmission type: 2.4GHz Fixed Frequency Agile System
System dynamic range: 112dB
Range (distance): 100m
Frequency range: 35Hz - 22kHz
Maximum output level: 1v Rms (2.8v P-p)
Max input signal level: 1v Rms (2.8v P-p)
Max latency: 4ms

Receiver (RX-CAM)

Power source: 2 X AA Battery Or MicroUSB
Antenna: Internal
Output connection: 3.5mm TRS Locking Jack Socket - Dual Mono
Output impedance: 300?
Dimensions: 111mm X 65mm X 52mm
Weight: 190gm

Transmitter (TX-BELT)

Power source: 2 X AA Battery Or MicroUSB
Antenna: Internal
Output connection: 3.5mm TRS Locking Jack Socket
Output impedance: 10k?
Dimensions: 111mm X 65mm X 40mm
Weight: 190gm

Lavalier

Acoustic Principle: Pressure Gradient
Active Electronics: JFET impedance converter
Capsule: 0.10"
Address Type: End
Frequency Range: 60Hz - 18kHz
Output Impedance: 3000?
Maximum SPL: 110dB SPL (@ 1kHz, 1% THD into 1K? load)
Maximum Output Level: 189.0dBu (@ 1kHz, 1% THD into 1K? load
Sensitivity: -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 25dB-A
Weight: 1.00gm
Dimensions: 12.00mmH x 4.50mmW x 4.50mmD
Warranty: 10 year warranty