PocketWizard Plus IIIe 2-Transceiver Kit

With the Plus IIIe 2-Transceiver Kit, PocketWizard offers a comprehensive wireless triggering solution. Each transceiver has a brand-new Plus III update that includes 112 channels and a (E Release) increased maximum wireless range of up to 5 miles pre-installed at the factory. The set comes with a bag for storage and transportation. 

There are 80 Long Range Quad-Zone LR channels and 32 Quad-Zone E-Channels among the transceiver's 112 channels. When performing numerous setups, this not only eliminates interference but also enables you to activate flashes in 4 distinct zones (A, B, C, and D). The suitable transmitter or receiver mode for the arrangement is automatically chosen by auto-sensing. You can activate a remote camera and remote flashes by combining auto-sensing and auto-relay mode. 

Two-Stage Triggering technology awakens and focuses your camera while partially depressing the test button, then shoots it by fully depressing the button. The Plus IIIe's increased wireless range allows shooting from distances up to 5 miles, compared to the original Plus III's famed 1600' triggering range! 

In ideal circumstances, this transceiver can transmit and receive a signal up to five miles distant, whereas the earlier Plus III's range was just 1600' eleventy-two channels. 

The PocketWizard Plus IIIe Transceiver's 112 channels let you turn on specific lights, groups of lights, or both simultaneously and separately. This is essential while working in crowded spaces or with various lighting configurations. 

Triggering in a Quad-Zone 

Up to 4 working zones can be set up for remote control of flashes. This gives you the option to remotely turn on and off your flashes, allowing you to stay in the shooting position without having to manually modify lighting arrangements. This is perfect for using various lighting configurations and controlling remote cameras as necessary. 

A self-detecting transceiver 

The Plus IIIe Transceiver's proprietary Auto-Sensing Transceiver technology allows it to be configured to independently transmit (Tx) or receive (Rx) when necessary. 

Auto-Relay Mode

The transceiver affixed to the camera may instantaneously receive a signal from an auxiliary transceiver and then transmit the transmission to a remote flash using three PocketWizard radios with Auto-Sensing technology. 

High Speed Capability

This transceiver can trigger cameras or flashes up to 14.5 frames per second when it is in High Speed Receiving mode. 

Remote Camera Triggering in Two Stages 

For remote camera triggering, the Plus IIIe Transceiver is ideal. The Plus IIIe's unique two-stage TEST button functions exactly like your camera's shutter release button. Your remote camera awakens to meter and focus when you press it halfway. To take your picture, fully press the TEST button. Your remote camera will generally resume sleeping after being released, thereby conserving battery life. 

User interface and design simplicity 

All of the channels, zones, and modes may be set with a soft-touch keyboard, and they are all clearly shown on a 1" / 2.5cm backlit LCD. A side-view LCD is also incorporated into the transceiver's design for simpler viewing. 

Complies with FCC 

Only models that also comply with FCC regulations may be utilized with this item. Using

Specification

Wireless

Channels : 112

Groups : 4 (A, B, C, D)

Wireless Range : 26400' / 8046.72 m

Radio Frequency : 340 to 354 MHz

General

Control Modes : Manual

Flash Interval : 14.5 Flashes per Sec

Sync Speed : 1/250 Sec (Normal), 1/500 Sec (Leaf)

Connectivity

Inputs/Outputs : 1 x 1/8" / 3.5 mm, 1 x Mini-USB

Mounting

Bottom Mount : Hot Foot

Electrical

Battery Type : 2 x AA

Sync Voltage : 300 V

Environmental

Operating Temperature : 5 to 122°F / -15 to 50°C

Storage Temperature : -22 to 185°F / -30 to 85°C

Physical

Dimensions : 5.25 x 2 x 1.25" / 13.34 x 5.08 x 3.17 cm

Weight : 4 oz / 120 g