Paterson 2000D Darkroom Timer

Mains operated digital timer for very accurate exposure timing when using an enlarger. The timer can be set in 0.1 second increments from 0.1 to 9.9 seconds, or in one second increments from 10 to 99 seconds. The display brightness can be adjusted to suit individual requirements. The timer is available in both 230 and 110 volt versions. Available with “UK, American, Australian, and European Plug” The timer should be connected between the electricity supply outlet and the enlarger when the enlarger uses a mains voltage lamp. If the enlarger has a low voltage lamp operated from a transformer, the timer should be connected between the mains outlet and the transformer. The time is set using the + or – buttons. Timing begins when the start button is pressed. The timing can be interrupted at any point by pressing the start button. Once the time set is reached the enlarger switches off and the previously set time is again set ready for a further exposure. If the timing cycle is interrupted the previously set time can be restored by pressing the reset button.