The AC3 ZoneController for Nikon is the gem of the ControlTL product line. Add it to your on-camera MiniTT1 Transmitter or FlexTT5 Transceiver and you instantly have three zones of flash control. Whether working in i-TTL or Manual mode, you now have control over all your flashes directly from the camera's position. Put your flashes wherever you want, without worrying about having to access them during a shoot. With the AC3 ZoneController, you are in total control of your flash.

Three clearly labeled dials allow you to increase or decrease power to three zones of flash in 1/3-stop increments with a range of up to six stops. Three switches allow you to change zones between Manual, Auto or OFF. Best of all, the design is simple with an intuitive interface.

ControlTL: PocketWizard's new firmware platform taps into the full potential of your camera and flash system enabling an entirely new level of remote flash capability through the proven radio communications. ControlTL firmware is configurable and upgradeable for future-proof continuous improvement

i-TTL Compatibility: Designed to work seamlessly with Nikon's i-TTL system, the AC3 ZoneController removes operating complexity with its easy-to-use design

Manual Power Control: With three simple dials, you can quickly adjust the power settings for three independent zones in 1/3rd stop increments with a six stop range

ZoneControl: Control up to three zones of light, each with one or more flashes, right from the camera's position. Set them all on manual, auto, or mix the settings between zones. Need to turn a zone off? Just slide a switch and it's off

PowerTracking: In Auto Mode, change ISO, aperture, or FEC and the lights automatically adjust their compensating power setting with PocketWizard PowerTracking

Studio Flash Compatibility: When used in conjunction with a PowerST4 Receiver for Elinchrom RX, or a FlexTT5 paired with an AC9 AlienBees Adapter, you have remote power control over Elinchrom RX, AlienBees and White Lightning studio flash

Simple Design: The AC3 weighs almost nothing and slips into the top-shoe of your on-camera MiniTT1 or FlexTT5. There are three dials and three switches, one for each zone

Auto-Manual Switch: This switch allows you to set each zone to either Manual Power Control, Auto or Off. Set it to off and that zone will not fire

Easy to read dials: Clearly labeled from +3 to -3 in 1/3rd stop increments. In Auto mode, the dials act as flash exposure compensation. In manual mode, +3 on the dial is your flashes maximum power level

Specifications: