FREE SHIPPING
Free shipping on all orders over $99.
FAMILY-OWNED
Since 1978
EASY RETURNS
14 Day Return Policy
The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot. The new PocketWizard ControlTL® System interprets the complex CLS / i-TTL data being sent through the camera's hot shoe and digitally transmits it in a reliable radio signal. Change the exposure compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash. Adjust your aperture or ISO and the system automatically corrects for those changes. ne or more PocketWizard FlexTT5® Transceivers connected to Nikon CLS / i-TTL flashes or any PocketWizard Receiver for triggering flash or remote cameras.
The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot. The new PocketWizard ControlTL® System interprets the complex CLS / i-TTL data being sent through the camera's hot shoe and digitally transmits it in a reliable radio signal. Change the exposure compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash. Adjust your aperture or ISO and the system automatically corrects for those changes.
Add the PocketWizard AC3 ZoneController to easily adjust up to three zones of light independently, in both i-TTL or manual. PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight. Now you can deploy a wireless i-TTL flash system wherever you want, without infrared limitations, in seconds. Take advantage of PocketWizard's HyperSync Technology that allows 1/500th of a second camera sync or more with many camera/strobe set-ups. HyperSync allows you to advance the timing of your flash trigger so that faster than X-sync speeds can be achieved.
Need more speed? Push your ControlTL system beyond 1/500th and go into High Speed Sync / FP mode automatically. With HSS Sync engaged in the camera menu, select any shutter speed you want with your Nikon i-TTL flashes, all the way up to 1/8000th of a second. With radio wireless, the possiblities of FP Sync become a lot more exciting.
Use the MiniTT1 with the PowerST4 Receiver, PowerMC2 Receiver, or AC9 AlienBees Adapter on a FlexTT5 and get remote power control with your Elinchrom RX or any Paul C. Buff flash.
Use the MiniTT1 with the PowerST4 Receiver, PowerMC2 Receiver, or AC9 AlienBees Adapter on a FlexTT5 and get remote power control with your Elinchrom RX or any Paul C. Buff flash.
Use the MiniTT1 for standard triggering with any PocketWizard Receiver including the FlexTT5, PlusII or MultiMAX. Yes, you can intermix i-TTL flash with any manual flash extending your lighting possiblities.
The MiniTT1 works on the powerful ControlTL platform and can be configured via the PocketWizard Utility. The PocketWizard Utility download is provided to support the MiniTT1 via a USB port. The Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers and update your product to the latest firmware.
The PocketWizard MiniTT1 Transmitter is the start of a new era in wireless trigger control.
Specifications:
TTL Compatible | Nikon CLS / i-TTL |
Number of Channels | 52 Channels over 26 Frequencies |
Antenna | Internal |
Maximum Range | Up to 800 feet (10 to 240 meters) for CLS / i-TTL triggering depending on flashused, antenna orientation and other variables. Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used,antenna orientation and other variables |
Mounting | Hot-shoe |
Maximum Shooting Rate | TTL Mode: within approximately 1 FPS of camera's maximum FPS Basic Trigger Mode: Camera Max FPS |
Status Indicator: | LED, Green, Amber, Red status indications |
Voltage Present: | 3.3 VDC (all pins) - safe for all cameras |
Hot Shoe voltage protection | Hot Shoe: up to 50V |
USB: | USB Compliant 2.0, Mini-B Connector |
Construction: | High impact plastic, captive battery door Hot shoe made of glass reinforced resin |
Power: | 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type |
Battery Life: | 30 - 50 hours of camera "awake time" depending on shooting habits |
Compatibile - Cameras | D3x, D3s, D3, D2x, D700, D300, D300s, D200, D90, D80, D40x, D40 NOTE: Nikon D3100 - camera has initial feature compatibility built into the firmware and will function well in normal sync modes however a future firmware update will be released shortly to improve timing capabilities with Rear CurtainSync and add other compatibility improvements. Nikon D7000 camera and SB-700 flash - currently being researched, and should beaddressed in a future firmware |
Non Compatible - Cameras | D1, D1x, D1h, D2h, D2hs, D100, D70, D70s, Coolpix and Film-based cameras |
Compatibile - Flashes | Nikon Speedlights as Remotes: SB-400, SB-600, SB-800, SB-900 Nikon On-Camera Master Flashes: SB-800, SB-900, SU-800 |
Non Compatibile - Flashes | Any older generation Nikon Flashes as Remote Units Such as: SB-80DX; SB-80; SB-28DX; SB-28; SB-50 |
Dimensions | 2.8 x 1.9 x 1.3" (7.1 x 4.9 x 3.3cm) LxWxH |
Weight | 2.3 oz (65g) |
One of the things we strive for is to provide you with the BEST possible price among any legitimate authorized dealer. On occasion, however, due to manufacturers restrictions or other restrictions, we may not be allowed to publish our lowest price on our website.
If you would like to receive our lowest possible price for the PocketWizard Mini TT1 Transmitter with Control TL - Nikon, please fill out the following information:
* -- Required Field
Note: Not valid on orders already placed.
We will not give out your e-mail address to anyone, nor use your e-mail address for anything other than to contact you with our pricing information for the item you requested.